The Path to the High Performance Thermal Building Insulation Materials and Solutions of Tomorrow
Journal article, Peer reviewed
MetadataShow full item record
Original versionJournal of Building Physics. 2010, 34 (2), 99-123. 10.1177/1744259110372782
In todays society there is an increased focus on various energy aspects. Buildings constitute a large part of the total energy consumption in the world. In this respect it is important to have the optimum heat balance in buildings. That is, in a cold climate one wants to have as well thermally insulated building envelopes as possible. However, even in cold climates there might often be relatively long periods with overheating in the buildings, e.g. due to solar heat gains and excessive heat loads from miscellaneous indoor activities. In warm climates overheati ng is most often the case, e.g. in office work spaces with large window glass facades and extensive use of electrical equipment. Insulation retrofit is among the most cost-effective measures, even more cost-effective than e.g. solar photovoltaics. The traditional thermal insulation materials of today have typically thermal conductivities between 33 and 40 mW/(mK). State-of-the-art thermal insulation includes vacuum insulation panels (VIPs) with conductivities from between 3 to 4 mW/(mK) in fresh condition to typically 8 mW/(mK) after 25 years ageing due to water vapour and air diffusion into the VIP core material which has an open pore structure. Puncturing the VIP envelope causes an increase in the thermal conductivity to about 20 mW/(mK). The main emphasis of this work centers around the possibilities of inventing and developing innovative and robust highly thermal insulating materials. That is, within this work the objective is to go beyond VIPs and other current state-of-the-art technologies. New concepts are introduced, i.e. advanced insulation materials (AIMs) as vacuum insulation materials (VIMs), gas insulation materials (GIMs), nano insulation materials (NIMs) and dynamic insulation materials (DIMs). These materials may have closed pore structures (VIMs and GIMs) or either open or closed pore structures (NIMs). The DIMs aim at controlling the material insulation properties, e.g. solid state thermal conductivity, emissivity and pore gas content. Fundamental theoretical studies aimed at developing an understanding of the basics of thermal conductance in solid state matter at an elementary and atomic level have been addressed. The ultimate goal of these studies is to develop tailor-made novel high performance thermal insulation materials and dynamic insulation materials, the latter one enabling to control and regulate the thermal conductivity in the materials themselves, i.e. from highly insulating to highly conducting. Furthermore, requirements of the future high performance thermal insulation materials and solutions have been proposed. At the moment, the NIM solution seems to represent the best high performance low conductivity thermal solution for the foreseeable future. If robust and practical DIMs can be manufactured, they have great potential due to their thermal insulation regulating abilities
JournalJournal of Building Physics
CopyrightThis is the authors' accepted and refereed manuscript to the article. The final publication is available at http://www.dx.doi.org/10.1177/1744259110372782
Showing items related by title, author, creator and subject.
State-of-the-Art and Future Building Envelopes: Application of Low Emissivity Materials, Phase Change Materials and Vacuum Insulation Panels Kalnæs, Simen Edsjø (Master thesis, 2014)Increasingly strict demands for the use of energy in buildings have put pressure on the construction industry to look for new ways to improve the built environment. This study has investigated three technologies, low-emissivity ...
Traditional, State-of-the-Art and Future Thermal Building Insulation Materials and Solutions – Properties, Requirements and Possibilities Jelle, Bjørn Petter (Journal article; Peer reviewed, 2011)The advantages and disadvantages of the thermal building insulation materials and solutions have been treated. Both traditional, state-of-the-art and possible materials and solutions beyond these have been investigated. ...
Assessment of the Thermodynamic Stability of Thermal Insulating Materials in Aluminium Electrolysis Cells Luneng, Raymond; Grande, Tor; Ratvik, Arne Petter (Conference object, 2016)The cathode bottom lining in aluminium electrolysis cells serves as a thermal insulating barrier and is important for the overall thermal and dimensional stability of the cell. The thermal insulation layer ...