Recent Submissions

  • Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines 

    Konda Gokuldoss, Prashanth; Kolla, Sri Sudha Vijay Keshav; Eckert, Jürgen (Journal article; Peer reviewed, 2017)
    Additive manufacturing (AM), also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, ...
  • Joining of dissimilar materials 

    Martinsen, Kristian; Hu, SJ; Carlson, B.E. (Journal article; Peer reviewed, 2015)
    Emerging trends in manufacturing such as light weighting, increased performance and functionality increases the use of multi-material, hybrid structures and thus the need for joining of dissimilar materials. The properties ...
  • Existential Design Applied in Universal Design Settings 

    Torkildsby, Anne Britt (Chapter, 2016)
    Abstract: The critical design method aims to discuss ways of opening up the (design) brief when planning, designing, building, operating and maintaining the future of the built environment – public as well as private, ...
  • Preconditions for Learning Factory A Case Study 

    Ogorodnyk, Olga; Granheim, Malin Victoria; Holtskog, Halvor (Journal article; Peer reviewed, 2016)
    This paper discusses improvements of an existing manual assembly line for roller skis when it was used as a template for a learning factory in the university. These improvements were in terms of lean philosophy and operations ...
  • Physical-Statistical Channel Model for Off-body Area Network 

    Mohamed, Marshed Kassim; Cheffena, Michael; Moldsvor, Arild; Fontán, Fernando Pérez (Journal article; Peer reviewed, 2017)
    Abstract: In this letter, a physical-statistical-based channel model for off-body wireless communications is presented. The model utilizes a dynamic human walking model, which provides detailed description of the movement ...
  • Vacuum Insulation Panels in Wood Frame Wall Constructions with Different Stud Profiles 

    Haavi, Thomas; Jelle, Bjørn Petter; Gustavsen, Arild (Journal article; Peer reviewed, 2012)
    In this work, the thermal performance of three different wall configurations was examined by hot box measurements and numerical simulations. Vacuum insulation panels were sandwiched between traditional insulation in walls ...
  • On Multi-Hop Decode-and-Forward Cooperative Relaying for Industrial Wireless Sensor Networks 

    Ai, Yun; Cheffena, Michael (Journal article; Peer reviewed, 2017)
    Wireless sensor networks (WSNs) will play a fundamental role in the realization of Internet of Things and Industry 4.0. Arising from the presence of spatially distributed sensor nodes in a sensor network, cooperative ...
  • Virkningsgrad til dyser benyttet i Soft Landing Cylinder 

    Haukås, Carl Helge Bacus; Kvalsvik, Petter Andreas; Gjestvang, Andreas (Bachelor thesis, 2016)
    Innledning: EAB Engineering AS er leverandør av blant annet subsea-utstyr til installasjonsprosessen av utstyr på havbunnen. Dette utstyret er modulbasert, og senkes individuelt ned på havbunnen fra et skip. Landingen er ...
  • Kombinere data fra drone og laser til BIM formål 

    Obrestad, Gudmund; Sørensen, Jonas Johansen Bjørnsveen (Bachelor thesis, 2016-10-07)
    Det blir stadig mer utbredt å lage intelligente 3d modeller, såkalte BIM modeller, av eksisterende bygg. Både som et hjelpemiddel for eventuelle framtidige endringer på bygget, og ved behov for å få eldre bygg inn i et ...
  • Design av frontmonterte feiemaskin med oppsamler for bæremaskin 

    Broks, Andreas Dilling; Gaarder, Anne Marte; Hollingsæter, Torunn Schønning (Bachelor thesis, 2016-10-05)
    Målet ved oppgaven har vært å utvikle oppsamlingsprosessen for frontmontert feiemaskin med oppsamler for bæremaskin. Tokvam skal utvikle en kost med oppsamler, for å følge markedstrenden, og fortsatt være en aktuell aktør ...
  • Norway's First Learning Factory - A Learning Outcome Case Study 

    Granheim, Malin Victoria (Master thesis, 2016-09-29)
    Purpose: with this master thesis, Norway’s first learning factory was built. The purpose was to conduct a case study and find the learning outcomes students had by partaking on the activity. Approach: a thorough literature ...
  • Development of educational activity based on the learning factory in order to enhance learning experience 

    Ogorodnyk, Olga (Master thesis, 2016-09-29)
    Purpose: The following thesis describes development of educational activity in order to enhance students’ practical and theoretical knowledge on topics of kaizen, waste types, efficiency, push/pull production systems, in ...
  • The shift from CSR to shared value: Are Indian companies ready 

    Chennuru, Rahul Rineeth (Master thesis, 2016-09-29)
    In the field of business the social factor is just as important as the economic factor. They both are interconnected and have a significant impact on one other. Businesses acknowledge this and agree that for a healthy ...
  • Electrical consumption dilemma - All we need is a new metering system? 

    Grøterud, Jenny (Master thesis, 2016-09-29)
    Electricity consumption are increasing, as our society keeps on growing. Due to climate changes and human impacts, it is clearly that we need to slow down this trend. One of the most important activity that each consumer ...
  • Considerations of road condition in relation to ground conditions - Case study in Nedre Eiker municipality 

    Josephson, Erik (Master thesis, 2016-09-29)
    This study concludes that the municipal road network in Nedre Eiker has a large maintenance backlog. There are many critical damages on the roads that should be repaired immediately. This study looked at the prevalence ...
  • Implementation of Value Stream mapping in a job shop for High – Mix, Low - Volume Environment 

    Azeem, S. MD Abdul (Master thesis, 2016-09-29)
    In the present age of competitive manufacturing, every manufacturing industry wants to manufacture lean. One of the ways to achieve it is by eliminating inefficiencies in the operations. Value stream mapping is one of the ...
  • Future Manufacturing Systems in Norway – Strategy, Architecture and Framework 

    Kolla, Sri Sudha Vijay Keshav (Master thesis, 2016-09-29)
    This study investigates the suitability of Cyber Physical Systems (CPS) in Norwegian manufacturing industries and its implementation. This study explores the research and innovation needs in Norway which will be given as ...
  • Bruteknologi i Bygg 

    Klethagen, Tor Kristoffer; Løken, Lasse; Svenneby, Dag Henning (Bachelor thesis, 2016-09-27)
    Innledning: I denne oppgaven skal vi sammenlikne to bærekonstruksjoner som skal bære et spenn på 24 meter mellom to seksjoner i et bygg som skal bestå av leiligheter. Spennet består av tre plan hvor underkanten av plan 1 ...
  • Optimalisering av byggeplassledelse 

    Andersen, Magnus (Bachelor thesis, 2016-09-27)
    Jeg har i oppgaven valgt å ha fokus på optimalisering av byggeplassledelse på formannsnivå. Samarbeidende entreprenørbedrift har vært Martin M. Bakken AS. Datagrunnlag for oppgaven er innhentet gjennom en to-ukers ...
  • Kartlegging av reservevann for Vestre Toten kommune 

    Fjellheim, Øyvind (Bachelor thesis, 2016-09-27)
    Reservevann blir et mer og mer aktuelt tema for vannverkseiere da de hele tiden må kunne levere tilstrekkelig mengde og sikkert drikkevann til abonnentene sine. Problemstillingen i oppgaven dreier seg i hovedsak om ...

View more