Viser treff 1-5 av 5
Solid liquid interdiffusion wafer-level bonding for MEMS packaging
(Doctoral theses at Buskerud and Vestfold University College;5, Doctoral thesis, 2015)
The trend of micro-electronic-mechanical-systems (MEMS) packaging requires costeffective and high performance packaging techniques. The objective of this study is to develop solid-liquid-interdiffusion (SLID) wafer-level ...
Integratable opto-microfluidic devices for sensitive detection of bio-analytes
(Doctoral Theses at Buskerud and Vestfold University College;3, Doctoral thesis, 2014)
The expensive fabrication of current optical microfluidic devices is a barrier to the successful implementation of these devices in low-cost, high-sensitivity biosensing systems. Organic photodiodes (OPDs) have great ...
Optimization of flow behavior in biomass gasification reactor
(Doctoral dissertations at TUC;2:2015, Doctoral thesis, 2015)
Dual fluidized bed reactor for steam gasification of biomass is a promising technology and can be used in Combined Heat and Power (CHP) production. The producer gas from the reactor can have a calorific value up to 14 ...
Miniaturization of Circuit Packaging of an Accelerometer Heart Monitoring Device
(Doctoral dissertations at the University College of Southeast Norway;7, Doctoral thesis, 2016)
Continuous monitoring heart activity based on implantable accelerometer devices have been demonstrated as efficient method that could provide higher sensitivity and specificity than the conventional electrocardiography ...
Hydrogen leaks in partially confined spaces - dispersion and explosions
(Doctoral thesis, 2017-12-12)
In Porsgrunn, Norway, there was an explosion in an ammonia plant in July 1985. The accident was caused by a hydrogen leak inside a factory building, called N1. The result was a severe hydrogen-air explosion and jet fire, ...