Show simple item record

dc.contributor.advisorMuskulus, Michaelnb_NO
dc.contributor.authorMartens, Johan Henriknb_NO
dc.date.accessioned2014-12-19T11:33:18Z
dc.date.available2014-12-19T11:33:18Z
dc.date.created2014-08-13nb_NO
dc.date.issued2014nb_NO
dc.identifier737700nb_NO
dc.identifierntnudaim:11909nb_NO
dc.identifier.urihttp://hdl.handle.net/11250/232903
dc.description.abstractThe construction of offshore wind farms for electricity production has shown great promise. Both as a contributing element in mitigating the ongoing climate changes, and in lessening the global oil dependency. However, construction and operation cost is a limiting factor in utilization of offshore wind energy on a significant scale. The potential for cost reduction related to the support structure is high. In this thesis, a script was written to optimize the topology of a jacket support structure by utilizing genetic algorithm (GA).GA is a heuristic optimization method mimicking the natural process known as "survival of the fittest". The algorithm was implemented using a MATLAB script while dynamic structural response was analyzed by a specialized simulation tool, Fedem Windpower. The topology optimization took a ground structure approach by utilizing a master jacket model. Several variations of this master model were continuously customized by the MATLAB script. Models that failed either by yielding, by fatigue or by the Fedem solver crashing, were discarded from the optimization. Surviving designs were evaluated for fitness using a cost related function. The jacket designs with the highest fitness were most likely to pass their traits on to the next generation of designs. At the end of this iterative optimization loop, the jacket topology with the highest fitness was the winner.Several simple cubic jackets, and more complex 32 m high jackets, were optimized. As a reference, the resulting topologies were compared with a quick manual optimization of the same design domain. The quality of the automatically optimized designs were highly dependent on the complexity of the ground structure utilized. The designs produced by GA had a higher fitness, i.e. lower cost, than the manually optimized counterpart for the simple cubic jacket and vice versa for the complex jacket. A decent topology was not generated for the most complex case considered, in part due to lack of computational power. The optimization runs carried out in this thesis has shed light on the potential and the limitation of GA in general, and on the employed implementation in particular. Superior and more cost-efficient topologies can likely be designed by an extended implementation of GA in combination with manual optimization. Suggestions for further work is given.nb_NO
dc.languageengnb_NO
dc.publisherInstitutt for bygg, anlegg og transportnb_NO
dc.titleTopology Optimization of a Jacket for an Offshore Wind Turbine: by Utilization of Genetic Algorithmnb_NO
dc.typeMaster thesisnb_NO
dc.source.pagenumber136nb_NO
dc.contributor.departmentNorges teknisk-naturvitenskapelige universitet, Fakultet for ingeniørvitenskap og teknologi, Institutt for bygg, anlegg og transportnb_NO


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record