Now showing items 1-10 of 58
Identification of spatially distributed precipitation-runoff response routines for hourly simulation in gauged and ungauged basins
(Doctoral thesis at NTNU;2015:6, Doctoral thesis, 2015)
Due to sudden and considerable flow fluctuations during hydropeaking operation, forecasting of inflow to hydropower reservoirs at high temporal resolution (e.g. hourly) is required. Prediction of streamflow for both ...
EVALUATION OF THE STRAIN FIELD IN A COMPOSITE – METAL ADHESIVE JOINT WITH AN OPTICAL BACKSCATTER REFLECTOMETER
(Conference object, 2012)
Knowing the strains and stresses in an adhesive joint is critical for the understanding and proper modeling of adhesive joints. To find a good method for measuring this has been a part of the work done by FP7 Co-Patch ...
Dynamics of aluminum use in the global passenger car system: Challenges and solutions of recycling and material substitution
(Doctoral thesis at NTNU;2015:116, Doctoral thesis, 2015)
This thesis analyzes the relationship between the design of vehicles, end-of-life vehicle (ELV) management, and global material production using aluminum as an example. Vehicle manufacturing, material industries and ELV ...
Nanomechanical testing of iron and steel
(Doctoral thesis at NTNU;2014:339, Doctoral thesis, 2014)
Assessing Climate Change Impacts on Global Hydropower
(Journal article; Peer reviewed, 2012)
Currently, hydropower accounts for close to 16% of the world’s total power supply and is the world’s most dominant (86%) source of renewable electrical energy. The key resource for hydropower generation is runoff, which ...
Workarounds in the Manufacturing Industry’s Information Systems: A sociomaterial perspective on technology-based organisational change
(Doctoral theses at NTNU;2017:119, Doctoral thesis, 2017)
Maintenance Strategies for Major Accident Prevention
(Doctoral thesis at NTNU;2015:272, Doctoral thesis, 2015)
The overall objective of this PhD thesis has been to develop new strategies for the prevention of maintenance-related major accidents in the process industries. By virtue of the new knowledge developed in this PhD project, ...
Coupled Fluid Flow and Elastoplastic Damage Analysis of Acid Stimulated Chalk Reservoirs
(Doctoral thesis at NTNU;2015:223, Doctoral thesis, 2015)
EVALUATION OF STIFFNESS AND DAMAGE OF LAMINAR COMPOSITES
(Doctoral thesis at NTNU;2015:161, Doctoral thesis, 2015)
The elastic constants of laminated composites are required for modelling of structures or components made from these materials. The variability in manufacturing can result in different composite material properties than ...
Closed Loop Tolerance Engineering
(Doctoral thesis at NTNU;2015:1, Doctoral thesis, 2015)
Dette avsnittet sammenfatter doktorgradsavhandlingen «Closed Loop Tolerance Engineering - An Approach for Designing Robust» i sin helhet. Arbeidet er utført av Lars Krogstie og avhandlingen har seks hovedkapittel (Ch.1-6) ...