Vis enkel innførsel

dc.contributor.authorNygårdsvoll, Erik
dc.date.accessioned2014-10-08T11:52:38Z
dc.date.available2014-10-08T11:52:38Z
dc.date.issued2014-06-16
dc.identifier.urihttp://hdl.handle.net/11250/223402
dc.descriptionMaster's thesis in Industrial economicsnb_NO
dc.description.abstractWater jet cutting has proven to be an effective technology for machining various materials, and providing a distinctive advantage over other cutting methods. Its application in the engineering industry is evolving and improving annually, and is one of the fastest growing machining processes. This thesis addresses the idea of applying water jet cutting technology as a new method for boring through rock in the construction of infrastructural tunnels. So far water jets have only be applied as a supplement to enhance traditional tunneling methods, but with the development of water cutting technology, new applications are increasingly becoming more relevant. In order to grasp the potential of Water Jet Tunneling, research has be made to further understand how tunnels are constructed, what tunneling methods are currently being used, how they work, and how water jet cutting works. The most common tunneling method used in Norway today is drilling and blasting (D&B), with an average advance rate about 8 to 10 hour per 5-meter advancement section. An alternative method is via a tunnel-boring machine (TBM), however, despite its fairly low operating cost per kilometer (compared to D&B), the initial cost of installing such a machine is too high relative to the length of the most tunnels constructed in Norway. Making D&B the most relevant competitive method for Norwegian tunneling projects. The findings of the research suggest that further development need to be devoted to find a new water jet cutting method to increase the cutting depth on harder rock, like granite and meta-sandstone, beyond the conventional limit of approximately 30 cm, in order to at all be competitive for tunneling purposes.nb_NO
dc.language.isoengnb_NO
dc.publisherUniversity of Stavanger, Norwaynb_NO
dc.subjectprosjektledelsenb_NO
dc.subjectindustriell økonominb_NO
dc.subjectindustrial economicsnb_NO
dc.subjecttunnelingnb_NO
dc.titleApplication of water jet cutting for tunnel boringnb_NO
dc.typeMaster thesisnb_NO
dc.subject.nsiVDP::Social science: 200::Economics: 210nb_NO
dc.source.pagenumber84nb_NO


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

  • Master's theses (TN-IØRP) [568]
    Masteroppgaver i Byutvikling og urban design / Masteroppgaver i Offshore technology : risk management / Masteroppgaver i Risikostyring / Masteroppgaver i Teknologi/Sivilingeniør : industriell økonomi / Masteroppgaver i Teknologi/Sivilingeniør : risikostyring / Masteroppgaver i Teknologi/Sivilingeniør : samfunnssikkerhet

Vis enkel innførsel