Vis enkel innførsel

dc.contributor.authorChai, Lu
dc.date.accessioned2013-09-24T08:32:18Z
dc.date.available2013-09-24T08:32:18Z
dc.date.issued2013
dc.identifier.urihttp://hdl.handle.net/11250/183018
dc.descriptionMaster's thesis in Offshore structural engineeringno_NO
dc.description.abstractThe primary function of a jacket structure is to support the weight of the topside structure by transferring the weight to the foundation. The jacket structure must also be designed to resist environmental loads (from wind and waves) and also accidental loads, such as boat impact, extreme environmental conditions and earthquake. This thesis presents the results from a strength assessment based on the conceptual design of an eight-legged jacket with V plus X braces pattern and an alternative six-legged jacket with fully X braces pattern. Subsequently, a study was carried out to compare the responses of the two jacket structures when they are subjected to an accidental collision from a floating living quarter (a flotel). To date, extensive research has been carried out on vessel-to-jacket collisions. However, little work has been performed for flotel-to-jacket collisions. This thesis implements the basic design principles of ship collision and several reasonable assumptions. It is expected that the results could provide an overview of how the different potential impact locations and directions will influence the resistance capacity of the jackets. It is also anticipated that this procedure and the assumptions could be a reference for related research in the future.no_NO
dc.language.isoengno_NO
dc.publisherUniversity of Stavanger, Norwayno_NO
dc.relation.ispartofseriesMasteroppgave/UIS-TN-IKM/2013;
dc.subjectoffshore teknologino_NO
dc.subjectkonstruksjonsteknikkno_NO
dc.subjectundervannsteknologino_NO
dc.subjectULS designno_NO
dc.subjectflotelno_NO
dc.subjectnon-linear analysisno_NO
dc.subjectconceptual jacket designno_NO
dc.subjectfinite element methodno_NO
dc.titleIn-place strength assessment of a jacket and effects of an impact with a floating living quarter (flotel)no_NO
dc.typeMaster thesisno_NO
dc.subject.nsiVDP::Technology: 500::Marine technology: 580::Offshore technology: 581no_NO


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

  • Master's theses (TN-IKM / TN-IMBM) [603]
    Masteroppgaver i Konstruksjoner og materialer / Maskin, bygg og materialteknologi (maskinkonstruksjoner, byggkonstruksjoner og energiteknologi) / Masteroppgaver i Offshore teknologi: industriell teknologi og driftsledelse - Offshore technology: industrial Asset management / Masteroppgaver i Offshoreteknologi : offshore systemer (konstruksjonsteknikk og marin- og undervannsteknologi-subsea technology)

Vis enkel innførsel