Masteroppgaver i Konstruksjoner og materialer (maskinkonstruksjoner, byggkonstruksjoner og energiteknologi) / Masteroppgaver i Offshore teknologi: industriell teknologi og driftsledelse - Offshore technology: industrial Asset management / Masteroppgaver i Offshoreteknologi : offshore systemer (konstruksjonsteknikk og marin- og undervannsteknologi-subsea technology)

Recent Submissions

  • VIV Prediction of Steel Lazy Wave Riser 

    Sukhov, Artemii (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-29)
    Deepwater oil and gas production is complicated by the structural complexity and uncertainty in prediction of the riser’s behavior. To date, Steel Lazy Wave Riser (SLWR) has been chosen as one of the most attractive riser ...
  • Study of lifting operation of a tripod foundation for offshore wind turbine 

    Zhu, Hui (Master thesis, 2017-06)
    Marine lifting operations play a key role in the installation of turbines and bottom-fixed foundations. Offshroe installations of the bottom-fixed foundations, tripod foundation in this study, are costly and risky due to ...
  • Optimization of Guide Structure for Elevators on Ships 

    Øie, Geir Marius (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)
    The existing design of marine and offshore elevators are mainly based on the expertise out of land-based elevators, with higher safety factors and all existing requirements being fulfilled. In the design of the guide ...
  • Conceptual design of oil and gas transportation system in the Barents and Kara Seas 

    Simukov, Denis (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)
    Regardless of the current oil and gas industry sufferings, the Arctic region still stands as one of the most perspective areas for the development of hydrocarbon fields. Estimated resources of the Arctic Ocean are ca. 100 ...
  • Kostnads- og egenskapsfordeler ved bruk av lettbetong i betongelementer 

    Årbu, Eivind Venås (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-13)
    Betongens verden er stor, komplisert og spennende. Oppgaven tar for seg de vanligste egenskapene som betong innehar, og om lettbetong kan utfordre disse egenskapene. Egenskapene som kartlegges, testes og sammenlignes er i ...
  • Pipelay with Residual Curvature 

    Tewolde, Abraham (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)
    Offshore pipelines under operating loads, i.e. under high temperature and pressure, are exposed to expansion and compressive forces, which may cause the pipeline to buckle globally. If significant lateral motion and excessive ...
  • Cost-effective model for self-assessment of maintenance management: An update to the “Maintenance Baseline Study” early developed by Norwegian Petroleum Directorate. 

    Suleymanov, Magomed (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)
    The self-assessment method is used to improve the maintenance management system and its related operations. It has the advantage over the maintenance auditing method, as it is a self-driven improvement method, less required ...
  • Capacity of Bolted T-stub Connections Between Different Materials Subjected to Tension and Thermal Load 

    Ydstebø, Kristian (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-14)
    The purpose of this thesis is to study the behaviour of bolted T-stub connections of different materials subjected to tension and thermal load. In the Eurocode, NS-EN 1993-1-8 [1], there are given rules and guidelines for ...
  • Structural performance of a prefabricated concrete beam with longitudinal cavities 

    Vilke, Tor Gunnar (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)
    Precast concrete elements are getting more and more popular in the construction industry. The precast elements are casted into many different shapes and sizes, which includes walls, beams, columns, slabs and more. There ...
  • Design, installation and operation of high voltage cables at sea. 

    Våbenø, Louise (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)
    Underwater cables have been connecting continents since the 1860s. Over time, the process of laying cables at sea has developed into a state-of-the-art operation. Now these operations are becoming more technologically ...
  • Challenges of Conversion from Document Management System to Data Management System 

    Siali, Irene (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)
    Issues that emerged from the use of the document management system and the desire to change to a database management system (DBMS) by many organizations is the driving force behind the ideas from this thesis. Draga AS ...
  • Evaluation of a nonlinear cumulative creep damage model for design applications 

    Nikolaisen, Amanda Joela Rachel (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)
    Predicting creep damage and remaining life of an engineering design is a complex task. There are many types of creep material models and they provide significantly different predictions. Furthermore, the necessary material ...
  • Wind Flow Simulation over Fish Farm Feed Barge 

    Nuland, Svein Erik (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)
    There are approximate over 1000 fish farms in Norway, where half are connected to the grid and the rest are driven by diesel generators. Fish farms use large air compressors to feed the fish, which creates high power ...
  • Operational limits for a stimulation vessel in the Northern Caspian Sea conditions 

    Shulkin, Roman (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)
    This Master’s thesis describes the concept development of a stimulation and well service vessel and the evaluation of its operational limits in Northern Caspian Sea conditions during a whole year of operation (all 4 seasons). ...
  • Emergency Release of Mooring Lines in the Barents Sea 

    Næss, Sigurd Vestbø (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)
    With increasing offshore activities in the Barents Sea, the need for risk reducing measures will increase as well. In the Arctic, the weather can change rapidly and is characterized by being difficult to forecast. As a ...
  • Optimization of Elevator Guide System on Ships 

    Røsholm, Finn Inge (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)
    The marine department of thyssenkrupp Elevator in Norway is looking for opportunities to optimize their installations for elevators on ships. Traditionally, their methods are based on the expertise from land-based ...
  • Assessment method for review of existing maintenance strategies based on reliability, availability, risk, and cost parameters 

    Olsen, Fredrik Westeng (Master thesis, 2017-06)
    Maintaining assets is a fundamental part of any industrial facility. Oil and gas operators are often using advanced maintenance strategies, but the strategies are usually built preoperation and not systematically updated ...
  • Lean and TPM Practices in an Industrial Context 

    Rasmussen, Magnus (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)
    Today ́s globalized market place, and rapid changes in businesses environment, brings forth a need for continuous improvement. Businesses all over the world compete against each other, therefore it is essential for ...
  • Benchmarking in Procurement Contract to Improve Performance 

    Mahendran, Manoj Kumar (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)
    In recent years, there has been unprecedented interest shown by organisations to adopt the best practices followed by the Industrial leaders. Competition in the Oil & gas market, companies becoming global player and advanced ...
  • Business Value from Visualisation Technologies 

    Pozniak, Sviatlana (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)
    Visualization technologies are common in industry. But recently, these technologies have found their applications in Petroleum (Oil and Gas) industry. The Oil and Gas industry constantly strives to increase production ...

View more