Bla i på forfattere "Rølvåg, Terje"
    • Analysis of Methods for Handling of Cemented Casing in Subsea Wells 

      Sangesland, Eivind (Master thesis, 2013)
      Plug and abandonment (P\&A) of subsea wells often involves removal of steel casing. In some parts of the well the casing is cemented in place making the operation of retrieving the casing more complex. The conventional ...
    • Balansering av motorer for maksimal ytelse 

      Hoem, Oda Enger; Røsholm, Vegard (Master thesis, 2016)
      Når en motor utstyres med lette racing-komponenter, slik som råder, stempel, ringer og bolter endres treghetsmomentet og motoren må rebalanseres. Det er foretatt en betydelig mengde forskning som omhandler motorbalansering ...
    • Colic Crib Testing 

      Mevåg, Hilde; Eri, Synnøve Bolstad (Master thesis, 2014)
      This master thesis is a continuation of the previously performed study Colic Crib Design and Testing (Eri & Mevåg, 2013) . Both the master thesis and the study have been conducted in order to establish the first phases ...
    • Connecting Rod Analysis 

      Nøst, Are (Master thesis, 2017)
      A virtual testing tool has been created in the FEDEM software by the supervisor, together with MXRR, which enables integrity analysis of the combustion engine, including the connecting rod. However, this test bench does ...
    • DESIGN AV ELECTRISK MOTOR FOR FORMULA STUDENT 

      Laleng, Andre Alexander (Master thesis, 2016)
      Revolve NTNU is a student organization that each year design and build a formula race car to participate in the engineering student competition Formula Student. Since its birth in 2010, Revolve NTNU has developed rapidly ...
    • Design of multiple air gap generator for renewable energy 

      Oterhals, Rune; Ohr, Torstein (Master thesis, 2012)
      The purpose of this project was to design and analyze the carrying structure of a multiple air gap generator for tidal turbine application. An initial patent pending electromagnetic design was provided by SmartMotor AS. ...
    • Design og dimensjonering av kontorstol 

      Storhaug, Thomas Angell (Master thesis, 2015)
      Jeg fastsetter at kravene til en kontorstol er å tåle at en bruker på 110 kg sitter i stolen. Videre skal stolen tåle at brukerens sittestilling endres og at lasten brukeren utsetter stolen for virker med forskjellige ...
    • Design og prosess automatisering 

      Auestad, Ørjan Westrum (Master thesis, 2014)
      Denne oppgaven ble skrevet for en norsk innovatørbedrift. Bedriften opplevde utfordringer knyttet til høye kostnader og logistikk. For å møte utfordringene ønsket bedriften bl.a. å automatisere deler av deres interne og ...
    • Development and testing of infant colic cradles 

      Börner, Christian (Master thesis, 2016)
      Colic is a frequently encountered problem. It is very common among infants. The colic time is a high physical and psychological stress for the entire family. Parents and siblings often do not know how to deal best with the ...
    • Development of Cross Cart Front Suspension 

      Bjerkaker, Magnus Fløttum; Christiansen, Thomas (Master thesis, 2012)
      -
    • Development of Cross Cart Front Suspension 

      Bjerkaker, Magnus Fløttum; Christiansen, Thomas (Master thesis, 2012)
      -
    • Development of environmentally friendly chair concept 

      Kratter, Lise Abrahamsen (Master thesis, 2012)
      The governing purpose of the thesis is to develop a chair concept based on a tilting mechanism called VAPAC. This chair concept has many potential ergonomic and environmental benefits that should be included and developed ...
    • Digital Twin of Crane 

      Christiansen, Erlend Erdal (Master thesis, 2018)
      This master thesis aims to make a digital twin of a crane for structural monitoring. A digital twin is any physical structure or mechanical system (asset) that is monitored and inspected by a digital model. Fedem, which ...
    • Digital Twin Solution for Structural Health Monitoring of Stadia Structures - Monitoring of Vibrations Caused by Dynamic Crowd Loads at Lerkendal Stadion 

      Løfaldli, Henrik (Master thesis, 2018)
      The combination of increased computational power, sophisticated sensors, and telecommunications enable monitoring by utilising digital twin concept. A digital twin is a virtual representation of a physical asset, that runs ...
    • Dynamic test bench for motocross engines 

      Rølvåg, Terje; Bella, Matteo (Journal article; Peer reviewed, 2017)
      Simulation of engine components enables early design verification and reduced development time while helping racing teams in getting new knowledge. This article presents a multidiscipline dynamic test bench and a benchmark ...
    • Empirical Study of Magnetically Operated PIG for Cleaning of Subsea Pipelines 

      Strømmegjerde, Lars S (Master thesis, 2013)
      The objective of this Master?s Thesis has been to verify several aspects of the EMPIG flow assurance system through functional prototype physical testing. Summaries of key findings, with reference to focus area, methods ...
    • Evaluering av metoder og verktøy anvendt i utviklingen av Formula Student biler i Nordiske team 

      Kjelstrup, Erling Gjerstad (Master thesis, 2013)
      This paper treats Formula Student, the world's largest motorsport competition for students. Through studying the cases of different Nordic teams created a god way to compare possible results. The theory of Formula Student, ...
    • Hjulopphengs rig for virtuell og fysisk dynamisk testing 

      Larsen, Fredrik (Master thesis, 2016)
      Som følge av at faget TMM4155 - Produktutvikling og materialer skulle bli oppdatert, hadde ansvarlig for kurset, Terje Rølvåg ønske om å lage nytt undervisningsopplegg. Dette skulle inneholde mer praktiske oppgaver, og et ...
    • Implementing Lean Systems Engineering in the DNV Fuel Fighter project 

      Tonning, Oluf Roar Bjørset (Master thesis, 2012)
      This thesis is a practical application of Systems Engineering in a full-scale project. The author has participated as a member of NTNU's Eco-marathon team, who has spent the last two semesters designing and manufacturing ...
    • INSPEKSJONSROBOT FOR HØYSPENTLINER 

      Bratt, Ole Anders (Master thesis, 2012)
      Fokuset på denne oppgaven har vært å designe en inspeksjonsrobot som vil kunne realiseres og en dag kunne sendes til produksjon. Det har derfor blitt lagt vekt på at ting skal kunne fungere, og ingen snarveier har blitt ...